List of Chastity Belts - Male
(Added device) |
(corrected link) |
||
| Line 141: | Line 141: | ||
==See Also== | ==See Also== | ||
| − | |||
*[[CB2000]] a male chastity device | *[[CB2000]] a male chastity device | ||
| + | *[[Chastity Belts - Personal Experiences]] | ||
*[[Chastity Belts]] | *[[Chastity Belts]] | ||
*[[Chastity piercing]] | *[[Chastity piercing]] | ||
Revision as of 09:26, 6 November 2007
This article is provide a summary of the different male chastity devices currently on the market. Manufacturers can freely add to this list. All enties should include the name of the device and a link to the website, a brief description, and a single photograph.
There is also the results of an on-line survey comparimg various male chastity designs here.
| Product Name | Description | Image |
| CB2000 | The CB2000 is a male chastity device made from clear polycarbonate that has been designed for long-term wear. It consists of two parts: a cock ring and a cage which surrounds the penis. A lockable nylon post holds the cage against the cock ring and when locked in place it is very difficult to remove. Whilst worn, it prevents the victim from achieving a full erection and effectively prevents masturbation. It does however rub and press against the penis, making it difficult for the wearer to forget that he has it on; this in turn can keep the wearer in a state of extended sexual frustration.
The design of the device allows it to be worn for extended periods (several weeks or more). Different size cock rings and spacers (supplied) allow the CB2000 to be fitted to a range of penis sizes. A minority of men have reported that they can pull their penis out of the CB2000, masturbate, and replace the penis. This was particularly prevelent in men with small penises or low-hanging testicles. The manufacturer has produced an add-on called "Points of Intrigue" to help with this problem. |
 |
| Steel Pleasures male chastity device | The Steel Pleasures male chastity device is constructed from stainles steel and employs the same basic method of fitting as the CB2000. Once fitted, the device is locked in place by inserting a small padlock (not shown) though one of three holes drilled in one of the posts. The device can be ordered with one of three different sized rings. Unlike the CB2000 the penis is not prevented from acheiving an errection as there is no cage at the front of the tube. Like the CB2000 it is also possible to extract the penis from the device when not errect, it is however almost impossible to remove the device as once locked in place the gap between the tube and ring is too narrow to let the testicles pass between them.
When fitted the device is not noticable when worn under loose fitting clothes. Steel Pleasures produce several variations on this basic design. |
 |
| ExoBelt | The ExoBelt takes the concept of the CB2000 a stage further and encases the entire scrotum in plastic. This produces a less athetically pleasing but probabily much more effective device.
From the manufacturers website: Most chastity devices today put pressure on the scrotum area. The ExoBelt does NOT rely on putting pressure on the scrotum for security, and because it doesn't need to put pressure on the scrotum the Exobelt is very comfortable for long term wear.
|
 |
| Sentinel male chastity device | The Sentinal male chastity device is constructed from chrome plated pewter and employs a hinged cock ring which goes at the base of the penis and which holds the device in place. The cage is slid over the penis and then locked to ring by a single padlock. When purchased there is a choice of three sizes of cock ring; the fact that it is hinged means that a much tighter ring can be worn than would otherwise be possible with a ring of solid construction, such as the CB2000.
|
 |
| Cerberus male chastity device | The Cerberus male chastity device is constructed from chrome plated pewter and used the same fitting system as the sentinal. The cock cage comes in two versions open and closed, size wise it is a little larger than the sentinal. When purchased there is a choice of three sizes of cock ring; the fact that it is hinged means that a much tighter ring can be worn than would otherwise be possible with a ring of solid construction, such as the CB2000.
|
 |
| Steelwerks | Steelwerks manufacture custom built chastity devices to order and to any design. These are precision engineered works of art and have a price tag to match.
The following article: http://www.jg-leathers.com/JG-L_Articles/Page-021-SW-JG-L-Article.htm gives a full account of the design and build process of a Steelwerks chastity device. |
 |
| Carrara Designs | Carrara Designs produce both male and female versions and are based on the traditional belted design with a lockable belt going around the waist and a second steel strap passing between the legs holding the cock cage in place
|
 |
| Tollyboy | Tollyboy is the oldest established manufacturer of chastity belts, the ocmpany started trading in 1956. they produce both male and female versions and are based on the traditional belted design with a lockable belt going around the waist and a second steel strap passing between the legs. The penis is held in place by a tube locked to the inside of the crotch plate.
From the manufacturers website: The standard male chastity belt follows a traditional Florentine design. This consists of a waistband (1.25 wide and 0.64 thick) with an attached crotch guard which is closed and locked at the centre of the waist. The crotch guard incorporates a penis sheath that, unlike other chastity belt manufacturers, is made to the individual's precise measurements. This is a separate component into which the penis is inserted, it is then engaged internally into the crotch guard, which is then locked to the waistband. The sheath is adjusted to its correct position externally and then secured with a second locking system. In this belt the penis is held pointing downwards and backwards between the legs, which prevents an erection but allows the wearer to urinate without any problem - except that he has to sit like a female. Once the sheath is locked into position the penis cannot be handled. The crotch guard is shaped and contoured to fit the genital area and stops just short of the anus, where it terminates in two flat-section stainless steel chains. To permit defecation these form a 'Y' configuration going over the buttocks to the waist band, where they are riveted. Manufactured from medical grade stainless steel (316), the belt is flexible enough to allow it to be sprung open or closed without the need for hinges, resulting in a very smooth profile. Tollyboy's locking system secures the waist band and crotch guard in one smooth joint, ensuring that the crotch guard remains vertical without any side to side swivel.
|
 |
| Neosteel | Neosteel produce both male, female, and shemale versions of the traditional belted design, a lockable belt goes around the waist and a second steel strap passing between the legs holding the cock cage in place. Their traditional design is most similar to that of the Tollyboy system offering both a flat belt (shown) and a curved belt versions. They also sell a system design where the buy can customise the belt to their own needs. As well as the basic chastity device they also offer an extensive range of addons for bondage, external strapons, internal plugs/dildos, electrics etc. They also sell a chastity measurement kit which allows the buyer to take their own measurements and be confident that they are ordering the correct size of belt.
Neosteel is a German company with a dual language website and on-line store.
|
 |
| Steelworxx | Steelworxx is a German company producing a range of male chastity devices all variations on the Steelheart design shown here. The website is duel language German/English.
From the manufacturers website: The chastity belt consists entirely of high-grade steel. The bent length up to the cross amounts to 4.331 inch (110mm). The ring has at the top a distance to the tube of 0.197 inch (5mm), below there are 0.591 inch (15mm). The tube inside diameter is selectable: 1.141 inch (29mm), 1.378 inch (35mm), 1.496 inch (38mm) or 1.732 inch (44mm). The overall length can be chosen between 3.346 inch (85mm) and 5.118 inch (130mm). The following ring sizes are available: 1.496 inch (38mm), 1.574 inch (40mm), 1.653 inch (42mm), 1.771 inch (45mm), 1.85 inch (47mm), 1.968 inch (50mm). Special sizes are possibly. You find a description of the masses in our FAQ`s. The weight amounts according to tube length and ring size to approx. 0.441 lbs (200 g). On request the chastity belt can be adapted to your images. |
 |
| Latowski Chastity Device | Mario Latowski is a German designer producing a very stylish (and expensive) male chastity device.
From the manufacturers website: The penis and testicles are protected against accesses and completely covered within an interior chamber made from high-quality form fitting silicone rubber. The surface feels like natural skin and does not leave any pressure marks. The Penis-sphere in the interior has the shaping of a member bent downward. When fitted you feel as though you are imprisoned in a female sheath. Three chamber sizes are available. For the testicles there is a separate split chamber, which provides sufficient protection from getting squeezed and cooling down. How long can the CB be worn? The experiences of my customers are completely different. They range from weekend use to the continuous carrier. The chastity belt is made of high-grade stainless steel type V4a. Its shaping is three-dimensional, in order to be able to enclose the body completely. That has the advantage that with the exact form the abdomen is pressed together spreading the contact over a wide area. Therefore the surface pressure is reduced and cuts and pressure edges can be avoided. |
 |
| Mistress Lori's Secure Locking System | Mistress Lori is based in the USA produces a range of male chasity devices based on the cock cage principle. The main point of difference is that most of her products are designed to be used with a gental peircing such as the Prince Albert, Frenum, Ampallang, and Apadravia piercings. Units are made from Stainless Steel. The use of the piercing to secure the penis in the tube negates the major shortcoming of this type of design in that the pensis can be pulled backwards out of the tube when flacid.
The website is quite basic and does not have an on-line store. Purchases need to be made by contacting Mistress Lori by email. |
 |
